THE PROBLEM
Why teak caulking goes sticky
Acid brighteners are the fastest way to bring teak back to gold. They work because they're acidic, and that acid doesn't stop working when the hose goes down.
A freshwater rinse takes off most of it. What's left sits in the grain and along the seams, where it keeps softening the caulking. Soft caulking turns sticky, holds dirt, lifts at the edges and fails early. Eventually the whole deck needs recaulking.
THE 3-STEP SYSTEM
The missing step in teak care
1
ALKALINE CLEANER
Lifts dirt and grime.
2
ACID BRIGHTENER
Restores the golden colour.
3
CAULKING CARE
Neutralises acid, protects seams.
Steps 1 and 2 have been on the market for years. Step 3 wasn't, until now. Keep the cleaner and brightener you already use, and finish with Step 3.
HOW IT WORKS
Neutralise the acid before it reaches the seams
Step 3 is a neutralising rinse. It reacts with the acid left behind after brightening and brings the deck back to a stable, neutral state before the residue can soften the caulking.
It doesn't stain teak. The colour you brightened stays golden.
APPLICATION GUIDE
Directions for use
- Use straight after Step 2 (acid brightener), while the deck is still wet.
- Dilute [X] ml of concentrate in a bucket of fresh water.
- Spread evenly over the deck and seams with a soft brush or mop.
- Leave for [X] minutes. Don't let it dry on the deck.
- Rinse thoroughly with fresh water and allow to dry.
Tips from the deck team
- In heat or direct sun, work in smaller sections so it never dries on the deck.
- Keep the deck wet between Step 2 and Step 3.
- Work the brush along the seams, not just across the boards.
- Rinse until the water runs clear.
DILUTION AND COVERAGE
How far a bottle goes
Dilution: [X] ml per 10 L of fresh water
Dwell time: [X] minutes
Coverage per 10 L bottle: approx. [X] m²
Washes per bottle: approx. [X], based on a [X] m² deck
FOR CHIEF OFFICERS AND CAPTAINS
Protection versus recaulking
STEP 3
Approx. €[X] per wash
One quick pass after brightening
No downtime
RECAULKING
€[X] per metre of seam, typical quote
Weeks of contractors and disruption
Time off charter
Step 3 is the cheapest protection the most visible surface on the boat will ever get. Trade accounts with invoicing and quantity pricing are available for yachts and management companies.
RESULTS
Tested by the deck team
"[Crew quote]"
[Role, yacht size, region]
"[Crew quote]"
[Role, yacht size, region]
SAFETY AND DOCUMENTS
Handle with care
- Wear gloves and eye protection.
- Keep out of reach of children.
- Rinse any splashes with plenty of water.
- [Storage instructions from final SDS]
[Environmental credentials: add once certified]
Using Step 3
How often should I use it?
Every time you use an acid brightener. Step 3 belongs at the end of every two-step clean.
Do I need it if I haven't brightened?
No. Without acid on the deck there's nothing to neutralise, so save it for washdowns that include Step 2.
What happens if it dries on the deck?
Re-wet the area and rinse thoroughly with fresh water. In heat, work in smaller sections to avoid it.
How soon can the deck be walked on?
Once it's rinsed and dry, the same as after any washdown.
Is it safe on new caulking, varnish and paintwork?
[Answer to confirm with manufacturer]
Will it work with the cleaner and brightener I already use?
Step 3 is designed to follow acid-based teak brighteners. Keep your current steps 1 and 2 and finish with Step 3.